ASTM A193 Grade B8MLCuNA Bolts, Stud Bolts, Fasteners
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A193 specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B6, B7, B8, B8M, etc.
Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics. This specification is expressed in both inch-pound units
and in SI units; however, unless the purchase order or contract specifies the applicable A193M specification designation (SI units), the inch-pound units shall apply
ASTM A193 Grade B8MLCuNA Raw Material
| Grade |
Raw Material Description |
| B8MLCuNA |
UNS S31254 Stainless Steel, Carbide Solution Treated |
ASTM A193 Grade B8MLCuNA Properties
ASTM A193 Grade B8MLCuNA Chemical Composition |
| Carbon |
Manganese, max |
Phosphorus, max |
Sulfur, max |
Silicon |
Chromium |
Molybdenum |
| |
|
|
|
|
|
|
ASTM A193 Grade B8MLCuNA Mechanical Properties |
| Grade |
Diameter |
Tensile Strength |
Yield Strength |
Elongation |
Reduction |
Hardness |
| Grade B8MLCuNA, Class 1A |
All Diameters |
515 |
205 |
30 |
50 |
192 HBW or 90 HRB |
ASTM A193 Grade B8MLCuNA Bolt Marking
| Class |
Manufacture's Mark |
Grade Symbol |
| Class 1A |
BPF |
B9K or B8MLCuNA |
Recommended Nuts & Washers
| Bolting Grade |
Nut Grade |
Washer Grade |
| ASTM A193 Grade B8MLCuNA |
ASTM A194 Grade 8MLCuNA |
254SMO / UNS S31254 |
ASTM A193 Grade B8MLCuNA Bolting