ASTM A193 Grade B7M Bolts, Stud Bolts, Fasteners
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A193 specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B6, B7, B8, B8M, etc.
Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics. This specification is expressed in both inch-pound units
and in SI units; however, unless the purchase order or contract specifies the applicable A193M specification designation (SI units), the inch-pound units shall apply
ASTM A193 Grade B7M Raw Material
| Grade |
Raw Material Description |
| B7M |
Chromium Molybdenum Alloy Steel, Quenched & Tempered |
ASTM A193 Grade B7M Properties
ASTM A193 Grade B7M Chemical Composition |
| Carbon |
Manganese, max |
Phosphorus, max |
Sulfur, max |
Silicon |
Chromium |
Molybdenum |
| 0.37 - 0.49 |
0.65 - 1.10 |
0.035 |
0.040 |
0.15-0.35 |
0.75-1.20 |
0.15-0.25 |
ASTM A193 Grade B7M Mechanical Properties |
| Grade |
Diameter |
Tensile Strength |
Yield Strength |
Elongation |
Reduction |
Hardness |
| Grade B7M |
M100 and under |
690 |
550 |
18 |
50 |
235 HBW or 99 HRB |
| Grade B7M |
M100 and over |
690 |
515 |
18 |
50 |
235 HBW or 99 HRB |
Heat Treatment
Quenched & Tempered at 620ยบ C minimum.
ASTM A193 Grade B7M Bolt Marking
| Manufacturer's Mark |
Grade Marking |
| BPF |
B7M |
Recommended Nuts & Washers
| Bolting Grade |
Nut Grade |
Washer Grade |
| ASTM A193 Grade 7M |
ASTM A194 Grade 2H, 2HM |
ASTM F436 |
ASTM A193 Grade B7M Bolting