ASTM A193 Grade B8PA Bolts, Stud Bolts, Fasteners
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A193 specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B6, B7, B8, B8M, etc.
Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics. This specification is expressed in both inch-pound units
and in SI units; however, unless the purchase order or contract specifies the applicable A193M specification designation (SI units), the inch-pound units shall apply
ASTM A193 Grade B8PA Raw Material
| Grade |
Raw Material Description |
| B8PA |
AISI 305 Stainless Steel, Carbide Solution Treated in Finished Condition |
ASTM A193 Grade B8PA Properties
ASTM A193 Grade B8PA Chemical Composition |
| Carbon |
Manganese, max |
Phosphorus, max |
Sulfur, max |
Silicon |
Chromium |
Molybdenum |
| |
|
|
|
|
|
|
ASTM A193 Grade B8PA Mechanical Properties |
| Grade |
Diameter |
Tensile Strength |
Yield Strength |
Elongation |
Reduction |
Hardness |
| |
|
|
|
|
|
|
ASTM A193 Grade B8PA Marking Requirements
| Class |
Manufacture's Mark |
Grade Symbol |
| Class 1A |
BPF |
B8H or B8PA |
Recommended Nuts & Washers
| Bolting Grade |
Nut Grade |
Washer Grade |
| |
|
|
ASTM A193 Grade B8PA Bolting