ASTM A193 Grade B8MLCuNA is a standard material specification for corrosion resistant & high strength Alloy 254 / UNS S31254 fasteners such as bolts, screws, studs, threaded rods and other externally threaded parts, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B8MLCuNA is a similar to Grade B8MLCuN except that the later is carbide solution treated after head forming and the former is carbide solution treated in finished condition. Grade B8MLCuNA is classified under tensile class 1A having minimum tensile requirement of 75 ksi, yield 30 ksi and maximum hardness limit of 192 HBW or 90 HRB. This specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B8MLCuNA Fasteners.
| Element | Austenitic Stainless Steel |
|---|---|
| UNS S31254 / Alloy 254SMO / 1.4547 | |
| CompositionA, % | |
| Carbon | 0.02 max |
| Manganese | 1.00 |
| Phosphorus | 0.030 max |
| Sulfur | 0.010 max |
| Silicon | 0.80 max |
| Chromium | 19.50 - 20.50 |
| Nickel | 17.50 - 18.50 |
| Molybdenum | 6.00 - 6.50 |
| Nitrogen | 0.18 - 0.22 |
| Copper | 0.50 - 1.00 |
AThe intentional addition of Bi, Se, Te, and Pb is not permitted.
| Tensile Class | Diameter, Inch | Tensile Strength, min, ksi |
Yield Strength, min, 0.2% offset, ksi |
Elongation in 4D, min, % |
Reduction of Area, min, % |
Hardness, max |
|
|---|---|---|---|---|---|---|---|
| Class 1A | All Sizes | 75 | 30 | 30 | 50 | 192 HBW or 90 HRB | |
Heat Treatment: Carbide Solution Treated in finished condition.
| Nut Specification | Washer Specification |
|---|---|
| ASTM A194 Grade 8MLCuNA | ASTM A240 UNS S31254 |
| Commonly Produced B8MLCuNA Fasteners | ||||
|---|---|---|---|---|
| Hex Bolts | Heavy Hex Bolts | Stud Bolts | Threaded Rods | Anchor Bolts |
| Eye Bolts | Socket Head Cap Screws | Countersunk Screws | U Bolts | Square Head Bolts |