ASTM A276 UNS S42010
ASTM A276 UNS S42010 is a material grade specification for cold-finished or hot-finished bars in S42010 stainless steel, available in form of rounds, square, hexagons and other hot rolled extruded shapes. Boltport uses S42010 bar stock to ASTM A276 specifications for manufacturing stainless steel S42010 bolts, nuts, screws, studs, threaded rods, other fasteners and bar stock components for general engineering purposes.
ASTM A276 specification covers requirements such as chemical composition, mechanical properties, heat treatment and other supplementary requirements for S42010 stainless steel round bars, square bars, hexagon bars and other extruded shapes.
Chemical Composition
| Identification Symbol | UNS Number | Grade | Elements | Composition % |
|---|---|---|---|---|
| - | S42010 | 21 chromium, 26 nickel, 4.5 molybdenum |
Carbon | 0.02 max |
| Manganese | 2.00 max | |||
| Phosphorus | 0.045 max | |||
| Sulfur | 0.035 max | |||
| Silicon | 1.00 max | |||
| Nickel | 23.00 - 28.00 | |||
| Chromium | 19.00 - 23.00 | |||
| Molybdenum | 4.00 - 5.00 | |||
| Copper | 1.00 - 2.00 | |||
| Nitrogen | 0.10 max |
Mechanical Properties
| Property | Value |
|---|---|
| Finish | Hot-Finished & Cold Finished |
| Tensile Strength, min, ksi [MPa] | 71 [490] |
| Yield Strength, min, ksi [MPa] | 31 [215] |
| Elongation in 2 in. [50mm] or 4D, min, % | 35 |
| Reduction or Area, min, % | -- |
| Brinell Hardness Number, HBW | -- |
Fasteners
-
Bolts -
Screws -
Studs -
Nuts -
Threaded Rods -
Pins -
Washers -
Components