ASTM B408 UNS N08811
ASTM B408 UNS N08811 is standard material specification for Inconel 800HT / Alloy 800HT bars and rods in hot-worked or cold-worked finished. Find requirement for UNS N08811 bar / rod chemical composition, mechanical properties, straightness, diameter, length and machining allowance, manufactured to ASTM B408 specification. Boltport offers bolts, screws, studs, threaded rods, nuts, washers and other bar stock fasteners to ASTM B408 UNS N08811 material specification.
Chemical Composition
| UNS Designation | Alloy | Elements | Composition % |
|---|---|---|---|
| N08811 | Inconel 800HT | Nickel | 30.00 - 35.00 |
| Chromium | 19.00 - 23.00 | ||
| Iron | 39.5 min | ||
| Manganese | 1.50 max | ||
| Carbon | 0.06 - 0.10 | ||
| Copper | 0.75 max | ||
| Silicon | 1.00 max | ||
| Sulfur | 0.015 max | ||
| Aluminum | 0.15 - 0.60 | ||
| Titanium | 0.15 - 0.60 |
Mechanical Properties
| Property | Value | |
|---|---|---|
| Condition | Cold-worked and hot-worked, annealed | Forging quality |
| Tensile Strength, min, ksi [MPa] | 65 [450] | Note B |
| Yield Strength, min, ksi [MPa] | 25 [170] | Note B |
| Elongation in 2 in. [50mm] or 4D, min, % | 30 | Note B |
Notes:
A: For hot-worked as-hot-worked rectangular bar 5⁄16 in. (7.94 mm) and under in thickness the elongation shall be 20 % min.
B: Forging quality is furnished to chemical requirements and surface inspection only. No tensile properties are required.
Fasteners
-
Bolts -
Screws -
Studs -
Nuts -
Threaded Rods -
Pins -
Washers -
Components