This specification covers chemical, mechanical requirements for austenitic grade stainless steel socket set screws (SSS) for imperial sizes between 0.060 through 0.500 inch in two alloy condition, AF and CW. ASTM F880M is a metric companion to this specification cover the same products in metric size from M1.6 to M12. These stainless steel socket set screws are intended for use in applications where general corrosion resistance is required. BoltPort manufactures Socket Set Screws as per ASTM F880 under grades 303, 304, 304L, 316 and 316L primarily. All products are duly tested for chemical, mechanical requirements, threads and dimensions and supplied with EN 10204 Type 3.1 Certification.
| Composition, & maximum except as shown | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | Copper | Molybdenum |
| Austenitic Alloys | ||||||||||
| S30300 | 303A | 0.15 | 2.00 | 0.2 | 0.15 min | 1 | 17.0 - 19.0 | 8.0 - 10.0 | -- | 0.60 maxA |
| S30323 | 303se | 0.15 | 2.00 | 0.2 | 0.06 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | -- | Se 0.15 min |
| S30400 | 304 | 0.08 | 2.00 | 0.045 | 0.03 | 1 | 18.0 - 20.0 | 8.0 - 10.5 | 1.00 | -- |
| A30403 | 304L | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 18.0 - 20.0 | 8.0 - 12.0 | 1.00 | -- |
| S30500 | 305 | 0.12 | 2.00 | 0.045 | 0.03 | 1 | 17.0 - 19.0 | 10.5 - 13.0 | 1.00 | -- |
| S38400 | 384 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 15.0 - 17.0 | 17.0 - 19.0 | -- | -- |
| S20300 | XM1A | 0.08 | 5.00 to 6.50 | 0.400 | 0.18 to 0.35 | 1 | 16.0 - 18.0 | 5.0 - 6.5 | 1.75 - 2.25 | 0.50 maxA |
| S30430 | 18-9LW | 0.10 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | 3.0 - 4.0 | -- |
| S30433 | 302HQ | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 17.0 - 19.0 | 8.0 - 10.0 | 3.0 - 4.0 | -- |
| S31600 | 316 | 0.08 | 2.00 | 0.045 | 0.030 | 1 | 16.0 - 18.0 | 10.0 - 14.0 | -- | 2.0 - 3.0 |
| S31603 | 316 L | 0.03 | 2.00 | 0.045 | 0.030 | 1 | 16.0 - 18.0 | 10.0 - 14.0 | -- | 2.0 - 3.0 |
A At the manufacturer's option, determined only when intentionally added.
| Nominal Screw Size | Shortest Nominal Screw Lengths Subject to Torque | Test Torque, in-lb, min | ||||
|---|---|---|---|---|---|---|
| Cup and Flat Points, mm | Cone and Oval Points | Half Dog Points, mm | AF | CW | ||
| 0 | 0.060 | 0.109 | 0.125 | 0.109 | 0.3 | 0.6 |
| 1 | 0.073 | 0.125 | 0.141 | 0.125 | 0.7 | 1.2 |
| 2 | 0.086 | 0.125 | 0.141 | 0.141 | 0.7 | 1.2 |
| 3 | 0.099 | 0.141 | 0.156 | 0.156 | 1.6 | 3.3 |
| 4 | 0.112 | 0.141 | 0.172 | 0.156 | 1.6 | 3.3 |
| 5 | 0.125 | 0.188 | 0.188 | 0.172 | 3 | 5 |
| 6 | 0.138 | 0.172 | 0.203 | 0.188 | 3 | 5 |
| 8 | 0.164 | 0.188 | 0.219 | 0.203 | 9 | 16 |
| 10 | 0.190 | 0.188 | 0.25 | 0.234 | 16 | 26 |
| 1/4" | 0.250 | 0.250 | 0.312 | 0.297 | 40 | 67 |
| 5/16" | 0.312 | 0.312 | 0.391 | 0.359 | 79 | 135 |
| 3/8" | 0.375 | 0.375 | 0.438 | 0.438 | 135 | 237 |
| 7/16" | 0.437 | 0.438 | 0.547 | 0.484 | 220 | 378 |
| 1/2" | 0.5 | 0.5 | 0.609 | 0.547 | 358 | 600 |