EN 10088-3 Grade X2CrTi17 / 1.4520

• Introduction
• Chemical Composition
• Mechanical Properties

X2CrTi17 / 1.4520

Chemical Composition

Steel designation		Chemical composition, % by mass
Steel Name	Steel Number	C max.	Si max.	Mn max	P max.	S	N max	Cr	Mo	Ni	Ti	Others
X2CrTi17	1.4520	0,025	0,50	0,50	0,040	≤ 0,015	0,015	16,0 to 18,0	-	-	0,30 to 0,60	-

Mechanical Properties

Steel designation		Thickness t or diameter c d	0,2 %-proof strength	Tensile strength	Elongation after fracture
Steel Name	Steel Number	mm	Rp0,2 MPa*) min.	R m MPa*)	A5d % min. (long.)
Special grades
X2CrTi17	1.4520	≤ 10e	320	500 to 750	8
		10 < t ≤ 16	300	480 to 750	10
		16 < t ≤ 40	240	400 to 700	15
		40 < t ≤ 50	240	400 to 700	15
a Including cut lengths from wire.
b Initial annealing treatment may be omitted if the conditions for previous hot working and subsequent cooling have been such that the requirements for the final mechanical properties of the product and the resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained.
c Width across flats for hexagons.
d Elongation A5 is valid only for dimensions of 5 mm and above. For smaller diameters, the minimum elongation has to be agreed upon at the time of enquiry and order.
e  In the range 1 mm ≤ d < 5 mm valid only for rounds. The mechanical properties of non round bars with thicknesses < 5 mm have to be agreed at the time of enquiry and order.
*)  1MPa = 1 N/mm².