ASME B18.6.1 Slotted Oval Countersunk Head Wood Screws

ASME B18.6.1 Slotted Oval Countersunk Head Wood Screws

Dimensions of ASME B18.6.1 Slotted Oval Countersunk Head Wood Screws

Size Body Diameter, E Head Diameter, A Head Height, H Slot Width, J Slot Depth, T Fillet Radius, R Thread Major Diameter
Max Min Max Min Max Min Max Min Max Min Max Max Min
0-32 0.055 0.044 0.113 0.099 0.053 0.043 0.023 0.016 0.039 0.029 0.016 0.064 0.053
1-28 0.066 0.055 0.138 0.122 0.061 0.051 0.026 0.019 0.044 0.033 0.016 0.077 0.066
2-26 0.075 0.064 0.162 0.146 0.069 0.059 0.031 0.023 0.48 0.037 0.016 0.090 0.079
3-24 0.086 0.075 0.187 0.169 0.078 0.067 0.035 0.027 0.053 0.040 0.016 0.103 0.092
4-22 0.095 0.084 0.211 0.193 0.086 0.075 0.039 0.031 0.058 0.044 0.016 0.116 0.105
5-20 0.107 0.096 0.236 0.217 0.095 0.083 0.043 0.035 0.063 0.047 0.031 0.129 0.118
6-18 0.118 0.107 0.260 0.240 0.103 0.091 0.048 0.039 0.068 0.051 0.031 0.142 0.131
7-16 0.127 0.116 0.285 0.264 0.111 0.099 0.048 0.039 0.072 0.055 0.031 0.155 0.144
8-15 0.136 0.125 0.309 0.287 0.120 0.107 0.054 0.045 0.077 0.058 0.031 0.168 0.157
9-14 0.147 0.136 0.334 0.311 0.128 0.115 0.054 0.045 0.082 0.062 0.031 0.181 0.170
10-13 0.157 0.146 0.359 0.334 0.137 0.123 0.060 0.050 0.087 0.065 0.031 0.194 0.183
12-11 0.176 0.165 0.408 0.382 0.153 0.139 0.067 0.056 0.096 0.073 0.031 0.220 0.209
14-10 0.201 0.190 0.457 0.429 0.170 0.155 0.075 0.064 0.106 0.080 0.046 0.246 0.235
16-9 0.214 0.203 0.506 0.476 0.187 0.171 0.075 0.064 0.115 0.087 0.046 0.272 0.261
18-8 0.237 0.226 0.555 0.523 0.204 0.187 0.084 0.072 0.125 0.094 0.046 0.298 0.287
20-8 0.260 0.249 0.604 0.570 0.220 0.203 0.084 0.072 0.134 0.101 0.046 0.324 0.313
24-7 0.303 0.292 0.702 0.664 0.254 0.235 0.094 0.081 0.154 0.116 0.046 0.376 0.365

Thread Length shall be 4 times the screw diameter or 2/3 the screw length, whichever is greater Screws less than 4 times their diameter shall be fully threaded.

Specifications Requirements :
  • Dimensions : ASME B18.6.1
  • Drive Style : Slotted
  • Material : 18-1 Stainless steel.
  • Thread Requirements : Rolled thread screws per ASME B18.6.1
  • Finish : Cleaned or descaled.