DIN 934 Field of Application

This standard specifies requirements for M1 to M160 hexagon nuts. assigned to product grade A (up to size M16) or product grade B (for sizes above M 16). If. in special cases. nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, they shall be selected in accordance with the relevant standards.

DIN 934 Hexagon Nut Dimensions

d	P	da		dw	s		e min.	m		m1 min.
		min	max		min	max		min	max
M1	0.25	1	1.15	2	2.4	2.5	2.71	0.55	0.8	0.44
M1.2	0.25	1.2	1.4	2.1	2.9	3	3.28	0.75	1	0.6
M1.4	0.3	1.4	1.6	2.1	2.9	3	3.28	0.95	1.2	0.76
M1.6	0.35	1.6	1.84	2.4	3.02	3.2	3.41	1.05	1.3	0.84
M2	0.4	2	2.3	3.2	3.82	4	4.32	1.35	1.6	1.08
M2.5	0.45	2.5	2.9	4.1	4.82	5	5.45	1.75	2	1.4
M2.6	0.45	2.6	3	4.1	4.82	5	5.45	1.75	2	1.4
M3	0.5	3	3.45	4.5	5.32	5.5	6.01	2.15	2.4	1.72
M3.5	0.6	3.5	4	5	5.82	6	6.58	2.55	2.8	2.04
M4	0.7	4	4.6	5.8	6.78	7	7.66	2.9	3.2	2.32
M5	0.8	5	5.75	6.8	7.78	8	8.79	3.7	4	2.96
M6	1	6	6.75	8.8	9.78	10	11.05	4.7	5	3.76
M7	1	7	7.75	9.5	10.73	11	12.12	5.2	5.5	4.16
M8	1.25	8	8.75	11.3	12.73	13	14.38	6.14	6.5	4.91
M10	1.5	10	10.8	15.3	16.73	17	18.9	7.64	8	6.11
M12	1.75	12	13	17.2	18.67	19	21.1	9.64	10	7.71
M14	2	14	15.1	20.2	21.67	22	24.49	10.3	11	8.24
M16	2	16	17.3	22.2	23.67	24	26.75	12.3	13	9.84
M18	2.5	18	19.5	25.3	26.16	27	29.56	14.3	15	11.44
M20	2.5	20	21.6	28.2	29.16	30	32.95	14.9	16	11.92
M22	2.5	22	23.7	29.5	31	32	35.03	16.9	18	13.52
M24	3	24	25.9	33.2	35	36	39.55	17.7	19	14.16
M27	3	27	29.1	38	40	41	42.2	20.7	22	16.56
M30	3.5	30	32.4	42.7	45	46	50.85	22.7	24	18.16
M33	3.5	33	35.6	46.6	49	50	55.37	24.7	26	19.76
M36	4	36	38.9	51.1	53.8	55	60.79	27.4	29	21.92
M39	4	39	42.1	55.9	58.8	60	66.44	29.4	31	23.52
M42	4.5	42	45.4	60.6	63.1	65	71.3	32.4	34	25.9
M45	4.5	45	48.6	64.7	68.1	70	76.95	34.4	36	27.5
M48	5	48	51.8	69.4	73.1	75	82.6	36.4	38	29.1
M52	5	52	56.2	74.2	78.1	80	88.25	40.4	42	32.3
M56	5.5	56	60.5	78.7	82.8	85	93.56	43.4	45	34.7
M60	5.5	60	64.8	83.4	87.8	90	99.21	46.4	48	37.1
M64	6	64	69.1	88.2	92.8	95	104.86	49.1	51	39.3
M68	6	68	73.4	92.9	97.8	100	110.51	52.1	54	41.7
M72		72	77.8	97.7	102.8	105	116.16	56.1	58	44.9
M76		76	82.1	102.4	107.8	110	121.81	59.1	61	47.3
M80		80	86.4	107.2	112.8	115	127.46	62.1	64	49.7
M85		85	91.8	111.9	117.8	120	133.11	66.1	68	52.9
M90		90	97.2	121.1	127.5	130	144.08	70.1	72	56.1
M100		100	108	135.4	142.5	145	161.02	78.1	80	62.5
M110		110	119	144.9	152.5	155	172.32	85.8	88	68.6
M125		125	135	168.6	177.5	180	200.57	97.8	100	78.2
M140		140	151	185.6	195.4	200	220.8	109.8	112	87.8
M160		160	171	214.1	225.4	230	254.70	125.5	128	100
Sizes in brackets should be avoided if possible. P= pitch of coarse thread as specified in DIN 13 Part 12. 2) As a deviation from ISO 4759 Part 1. tolerance zone h12 instead of h13 shall apply for widths across flats up to and including 4 mm. Minimum dimensions corresponding to tolerance zone h14 instead of h13 shall be permissible for M5 to M16 hot dip galvanized nuts.

DIN 934 Hexagon Nut Weight Chart (Kilograms/1000 Pieces)

Size	Weight
M1	0.030
M1.2	0.054
M1.4	0.063
M1.6	0.076
M2	0.142
M2.5	0.280
M3	0.384
M3.5	0.514
M4	0.81
M5	1.23
M6	2.50
M7	3.12
M8	5.20
M10	11.6
M12	17.3
M14	25.0
M16	33.3
M18	49.4
M20	64.4
M22	79
M24	110
M27	165
M30	223
M33	288
M36	393
M39	502
M42	652
M45	800
M48	977
M52	1220
M56	1420
M60	1690
M64	1980
M68	2300
M72	2670
M76	3040
M80	3440
M85	3930
M90	4930
M100	6820
M110	8200
M125	13000
M140	17500
M160	26500

DIN 934 Technical Delivery Conditions

Material		Steel	Stainless steel	Non-ferrous metals
General requirements		As specified in DIN 267 Part I.
Thread	Tolerance	6H 1)
	As specified in	DIN 13 Parts 12 and 15.
Mechanical properties	Property class (material)	For size M 2.5 or less: 6; for sizes between M 3 and M 39: 6, d or 10; for sizes above M 39: subject to agreement.	For sizes up to M 39: A 2-70 or A4-70; for sizes above M 39: subject to agreement.	Subject to agreement.
	As specified in	DIN 267 Part 4	DIN 267 Part 11	DIN 267 Part 18
Limit deviations, geometrical tolerances	Product grade	For sizes up to M 16: A: fot larger sizes: B.
	As specified in	ISO 4759 Part 1.
Surface finish		As processed.	Bright.	Bright.
		DIN 267 Part 2 shall apply with regard to surface roughness. DIN 267 Part 20 shall apply with regard to permissible surlace discontinuities. DIN 267 Part 21 5hail apply with regard to the widening test. DIN 267 Part 9 shall apply wlth regard to electroplating.) DIN 267 Part 10 shall apply with regard to hot dip galvanizing.
Acceptance inspection		DIN 267 Part 5 shall apply with regard to acceptance inspection.
l) Where a protective coating is applied. e.g. an electroplated coating complying with DIN 267 Part 9, depending on the coating thickness requlred. It may be necessary, particularly in the caso of tolerance class OH nuts. to select a larger fundamental deviatlon than that assigned to tha H posltion (800 DIN 267 Part 9). ThiG, impair the (631stance ot the bolt/nut assembly to stripping.

DIN 934 Reference Standards

Standard	Reference
DIN 13 Part 1	ISO metric screw threads; 1 mm to 68mm diameter coarse pitch threads; nominal sizes
DIN 13 Part 12	ISO metric screw threads: coarse and fine pitch threads with diameters from I to 300 mm; selection for diameters and pitches
DIN 13 Part 15	ISO metric screw threads; fundamental deviations and tolerances for screw threads of mm diameter and larger
DIN 267 Par-t 1	Fasteners; technical delivery conditions; general requirements
DIN 267 Part 2	Fasteners; technical delivery conditions; types of finish and dimensional accuracy
DIN 267 Part 4	Fasteners; technical delivery conditions; property Classes for nuts (previous classes)
DIN 267 Part 5	Fasteners; technical delivery conditions; acceptance inspection (modified version of ISO 3269, 1984 edition)
DIN 267 Part 9	Fasteners; technical delivery conditions; electroplated components
DIN 267 Part 10	Fasteners; technical delivery conditions; hot dip galvanizeq components
DIN 267 Part 11	Fasteners; technical delivery conditions, with addenda to ISO 3506; corrosion-resistant stainless steel components
DIN 267 Part 18	Fasteners; technical delivery conditions; non-ferrous metal components
DIN 267 Part 20	Fasteners; technical delivery conditions; surface discontinuities on nuts
DIN 267 Part 21	Fasteners; technical delivery conditions; widening test for nuts
DIN 267 Part 23	Fasteners; technical delivery conditions; property classes for nuts with fine pitch thread (ISO classes)
DIN 962	Bolts, screws, studs and nuts; designations, types and finishes
DIN 4000 Part 2	Tabular layout of article characteristics for bolts. screws and nuts
ISO 4759 Part 1	Tolerances for fasteners: bolts. screws and nuts with thread diameters 21 and 150 mm and product grades A, B and C