ISO 2341 Clevis Pin with Hole
Dimensions of Clevis Pin with Hole
| d1 h111) |
dk h14 |
d1 H132) |
c max. |
e = |
k js14 |
le min. |
r |
|---|---|---|---|---|---|---|---|
| 3 | 5 | 0.8 | 1 | 0.5 | 1 | 1.6 | 0.6 |
| 4 | 6 | 1 | 1 | 0.5 | 1 | 2.2 | 0.6 |
| 5 | 8 | 1.2 | 2 | 1 | 1.6 | 2.9 | 0.6 |
| 6 | 10 | 1.6 | 2 | 1 | 2 | 3.2 | 0.6 |
| 8 | 14 | 2 | 2 | 1 | 3 | 3.5 | 0.6 |
| 10 | 18 | 3.2 | 2 | 1 | 4 | 4.5 | 0.6 |
| 12 | 20 | 3.2 | 3 | 1.6 | 4 | 5.5 | 0.6 |
| 14 | 22 | 4 | 3 | 1.6 | 4 | 6 | 0.6 |
| 16 | 25 | 4 | 3 | 1.6 | 4.5 | 6 | 0.6 |
| 18 | 28 | 5 | 3 | 1.6 | 5 | 7 | 1 |
| 20 | 30 | 5 | 4 | 2 | 5 | 8 | 1 |
| 22 | 33 | 5 | 4 | 2 | 5.5 | 8 | 1 |
| 24 | 36 | 6.3 | 4 | 2 | 6 | 9 | 1 |
| 27 | 40 | 6.3 | 4 | 2 | 6 | 9 | 1 |
| 30 | 44 | 8 | 4 | 2 | 8 | 10 | 1 |
| 33 | 47 | 8 | 4 | 2 | 8 | 10 | 1 |
| 36 | 50 | 8 | 4 | 2 | 8 | 10 | 1 |
| 40 | 55 | 8 | 4 | 2 | 8 | 10 | 1 |
| 45 | 60 | 10 | 4 | 2 | 9 | 12 | 1 |
| 50 | 66 | 10 | 4 | 2 | 9 | 12 | 1 |
| 55 | 72 | 10 | 6 | 3 | 11 | 14 | 1 |
| 60 | 78 | 10 | 6 | 3 | 12 | 14 | 1 |
| 70 | 90 | 13 | 6 | 3 | 13 | 16 | 1 |
| 80 | 100 | 13 | 6 | 3 | 13 | 16 | 1 |
| 90 | 110 | 13 | 6 | 3 | 13 | 16 | 1 |
| 100 | 120 | 13 | 6 | 3 | 13 | 16 | 1 |
1) Other tolerancem for example a11, c11, f8 as agreed between customer and supplier.
2) Hole diameter dt = nominal size of the split pin (see ISO 1234)
3) For nominal lengths above 200 mm, steps of 120 mm.
Specifications and reference International Standards
| Material | St = Free-cutting steel or cold-healing steel. hardness 125 to 245 HV. Other materials as agreed between customer and supplier. |
|---|---|
| Surface Finish | Plain, i.e. pins to be supplied in natural finish treated with a rust-preventative lubricant, unless otherwise specifed by agreement between customer and supplier. |
| Preferred coatings are black oxide, phosphate coating or zinc plating with
chromate conversion coating (see ISO 2081 and ISO 4520). Other coatings as agreed between customer and supplier. All tolerance shall apply prior to the application of a plating or coating. |
|
| Workmanship | Parts shall be uniform in quality and free of irregularitites or detrimental
defects. No burns shall apper on any part of the pain. |
| Acceptability | The acceptance procedure is coverd in ISO 3269. |
Designation
Example for the designation of a clevis pin, steel , type B with nominal diameter d = 20 mm and nominal length l = 100 mm :
Clevis Pin ISO 2341 - B - 20 x 100 - St
Example for the same pin wtih a split pin hole of Φ 6.3mm :
Clevis pin ISO 2341 - B - 20 x 100 x 6.3 - St
Example for the smae pin with distance lh = 80 mm :
Clevis pin ISO 2341 - B - 20 x 100 x 6.3 x 80 - St
Example for the same pin with a standard split pin hole:
Clevis pin ISO 2341 - B - 20 x 100 x 80 - St