Fender Washers are alike flat washers but the only difference is that these fender washers have comparatively large outside diameter in proportion to the center hole. With the oversized outer diameter, this fender washer provides more bearing surface while installed between the bolt and nuts to facilitate distributing the load further.
These washers are punched / stamped out of the sheet metal. BoltPort can manufacture these large flat washers in metric and imperial sizes with wide material options and customization.
Forming : Hot & Cold Punched
Size : M3 to M100 in Metric, 5/16" to 4" in Imperial
Thickness : Standard and Custom
Standards : DIN, ASME, ISO & IS.
DIN 9021, DIN 9021B, ISO 7093, ASME B18.21.1, PN 82030, UNI 6593, CSN 21726
High Tensile Grade 8.8, 10.9, 12.9, Stainless Steel, 304, 316, 316ti, 321, 904L, Duplex 2205, S31803, Super Duplex, 2507, S32750, F55, S32760, Zeron 100, Inconel 600, 601, 625, 718, 925, Incoloy 800, 800, 800ht, 825, Hastelloy B2, B3, C22, C276, C2000, X, Monel 400, R405, K500, Titanium Grade 2, 5, 7, 9, 12, 23, Copper Nickel, Silicon Bronze, Aluminum & Phosphor Bronze, Tantalum, etc.
ASTM F436, ASTM F844, ASTM A36, ASTM A167, ASTM A240, ASTM A283, ASTM A387, ASTM A516, ASTM A572, ASTM A829, ASTM A633, ASTM A656, ASTM B127, ASTM B162, ASTM B171, ASTM B209, ASTM B424, ASTM B463, ASTM B551, ASTM B749, ASTM B755, etc.
|Product / Thread System||Heavy Hex Bolts||Heavy Hex Nuts||Hardened Heavy Washers|
|Imperial||ASME B18.2.1||ASME B18.2.2||ASME B18.21.1|
|Metric||ASME B18.3.6M||ASME B18.4.6M||ASME B18.22M|
|Metric||DIN 6914||DIN 6915||DIN 6916|