ASTM B408 UNS N08120 is standard material specification for Inconel 800 / Alloy 120 bars and rods in hot-worked or cold-worked finished. Find requirement for UNS N08120 bar / rod chemical composition, mechanical properties, straightness, diameter, length and machining allowance, manufactured to ASTM B408 specification. Boltport offers bolts, screws, studs, threaded rods, nuts, washers and other bar stock fasteners to ASTM B408 UNS N08120 material specification.

Chemical Composition

UNS Designation Alloy Elements Composition %
N08120 Alloy 120 Nickel 35.00 - 39.00
Chromium 23.00 - 27.00
Iron Remainder
Manganese 1.5 max
Carbon 0.02 - 0.10
Copper 0.50 max
Silicon 1.00 min
Sulfur 0.03 max
Aluminum 0.40 max
Titanium 0.20 max
Columbium 0.40 - 0.90
Molybdenum 2.50 max
Phosphorus 0.040 max
Tungsten 2.50 max
Cobalt 3.00 max
Nitrogen 0.15 - 0.30
Boron 0.010 max

Mechanical Properties

Property Value
Condition Cold-worked and hot-worked, annealed Forging quality
Tensile Strength, min, ksi [MPa] 90 [621] Note B
Yield Strength, min, ksi [MPa] 40 [276] Note B
Elongation in 2 in. [50mm] or 4D, min, % 30 Note B

Notes:
A: For hot-worked as-hot-worked rectangular bar 5⁄16 in. (7.94 mm) and under in thickness the elongation shall be 20 % min.
B: Forging quality is furnished to chemical requirements and surface inspection only. No tensile properties are required.

Fasteners

  • AISI 4140 Bolts
    Bolts
  • AISI 4140 Screws
    Screws
  • AISI 4140 Stud Bolts
    Studs
  • AISI 4140 Nuts
    Nuts
  • AISI 4140 Threaded Rods
    Threaded Rods
  • AISI 4140 Pins
    Pins
  • AISI 4140 Washers
    Washers
  • AISI 4140 Components
    Components